If the device causes any electromagnetic interference

EMI do, electromagnetic interference tests, radio frequency wave operating devices, malicious broadcasts, operating frequency and output power controls.If it is determined that the device does not cause any electromagnetic interference in such an environment, The device is successful in the EMI Test.
if the device is causing any electromagnetic interference, CE certification cannot be given to the device under test as it may disrupt the operation of other devices.

Telecommunication devices that do not meet EMI Test requirements

The devices covered by the Radio Telecommunications Terminal Equipment Directive must meet the EMI Test requirements in order to obtain CE certification.In the scope of the directive, all radio and telecommunication equipment, such as mobile phones, satellite receivers, fixed and direct phones, ADSL modem and other data modems, base stations, radio and TV transmitters, must meet the EMI Test requirements. Telecommunication devices that do not meet the EMI Test requirements may disrupt other devices or disrupt their operation.Likewise, these devices can also be damaged by interference due to this electromagnetic interference.Therefore, a telecommunication device must meet the requirements of the EMI test in order to obtain a CE certificate.

EMI test is carried out by the engineers in laboratory environment by considering different conditions. Whether or not the device causes electromagnetic interference is controlled by the Radio Telecommunication Terminal Equipment Directive with different variations.If the device does not cause any interference, it is approved for the CE certificate. Since the device or products must have CE marking in order to be circulated in the European Union free market, it is mandatory to apply EMI Test to the telecommunication products.

If the device does not cause any interference

After being tested in EMI test laboratories, being careful during the report and document phase is also very important for getting CE certificate. It is therefore necessary to be careful when choosing test laboratories.

Ege Test Center and CE Certificate

With the expert engineers trained in the defense industry and international test organizations, the CE certification works of your Ege Test Center products are completed quickly and quickly.

CE Certificate is taken following the following ways:

1. Stage Research and Detection

• First of all, product specifications are determined by determining the technical characteristics and intended use of the product.
• The directives entered by the product within the scope of CE are determined.
• After determining the product directives specific standards within the scope of the directive are determined.
• Determined if the notified body is required. Some risky product groups have a mandatory certification.
• Roadmap is examined under the directive or directives and the most appropriate road map is selected.
• Examining the requirements of the Quality Management System; Some directives provide for a quality system in the process of CE marking

2. Stage Test and Control process

• Testing, analysis and technical controls of the product according to the standards determined within the scope of the directives / directives and taking the necessary reports.
• Where necessary, obtaining certificates and test reports from the Notified Body establishment in risk product groups;
• Doing Risk Analysis;
• Preparation of appropriate user manual;
• Technical Documentation / Preparation of Technical File;
• Declaration of Conformity;

3. Stage Placing CE Marking and Storing Technical File

• CE marking is placed on the product according to the relevant directive.
• Store the Technical File of the Product for the period specified in the product directive and, where necessary, be archived to the competent authorities / market surveillance authorities.

4. Stage Product Launch

• At the end of the above processes, the product is entitled to carry CE marking and it is free to have free movement in our country and EU market.

In the CE certification process, our company will prepare your CE Certificate declaration by serving you in the fields of consulting, testing, reporting and technical file preparation with the laboratory facilities of EGE TEST CENTER.

For communication and detailed information

For communication and detailed information you can click This page or send mail marketing@egetestcenter.com