Ege Test Center, is changing its brand name with Testups Turkey. We will continue to provide our services with Testups Turkey brand. Our company title (Egetest Center Elektrik Elektronik Sanayi ve Ticaret Limited Sirketi) still remains.
EMC tests are performed in special test chambers. This EMC chamber is for performing radiated emission and immunity tests. We can measure up to 18GHz.
When you need EMC testing service or radiated immunity testing service click here and send your request online.
Radio Equipment Directive (2014/53/EU) of European Union is getting popular parallel to technological developments.
Happy Mother’s Day
Ege Test Center celebrates all mothers’ Mother’s Day.
European Union published a guide regarding Electromagnetic Compatibility (EMC) directive: Guide for the EMCD (Directive 2014/30/EU)
As this EMC Directive Guide mentions, the geographical application is described in Chapter 2.8 “geographical application” of the Blue Guide. The EMCD also applies in the EEA-EFTA States (Liechtenstein, Iceland, and Norway) and Turkey. Therefore, when the terms “European Union”, “Union”, “territory” or ‘Member States’ are used in this Guide, they apply to the EEA-EFTA States (Liechtenstein, Iceland, and Norway) and Turkey.
How to get EMC testing services?
You have to contact an EMC testing laboratory expert who is experienced in EMC testing. Ege Test Center experts provide you required information about EMC testing and certification of your product. Do you want to pass EMC tests and affix CE marking on your products? Contact us by visiting our contact page.
Ege Test Center helps designers, manufacturers, engineers, importers, exporters, researchers, universites and all other parties need EMC testing according to EMC Directive. You can ask any question regarding EMC Directive or send your request by using our Online Application form: https://en.egetestcenter.com/apply-online/
What is EMI Test?
EMI, electromagnetic interference tests, radio frequency wave operating devices, malicious transmissions, operating frequency and output power controls. If it is determined that the device does not cause any electromagnetic interference in the environment according to these criteria, the device will be successful in the EMI Test. However, if the device is causing any electromagnetic interference, CE certification cannot be given to the device under test as it may impair the operation of other devices.
What happens as a result of the incompatibility of EMI Test conditions?
The devices under the Radio Telecommunications Terminal Equipment Directive must meet the EMI Test requirements in order to obtain CE certification. All radio and telecommunication equipment, such as mobile phones, satellite receivers, fixed and direct telephones, ADSL modem and other data modems, base stations, radio and TV transmitters, must meet the EMI Test requirements. Telecommunication devices which do not have EMI Test conditions may disrupt other devices or disrupt their operation. Likewise, these devices can also be damaged by interference due to this electromagnetic interference. Therefore, a telecommunication device must meet the requirements of the EMI test to obtain a CE certificate.
EMI Test application and certification
EMI test is carried out by the engineers in the laboratory environment in consideration of different conditions. Whether the device causes electromagnetic interference is controlled by different variations within the scope of the Radio Telecommunications Terminal Equipment Directive. If the device does not cause any interference, it may be eligible for a CE certificate and a certificate of conformity cannot be issued if an interference is detected. EMI test is mandatory for the telecommunication products, as the device or products are required to have CE marking in order to circulate in the European Union free market.
Ege Test Center and EMI
After being tested in EMI test laboratories, being careful during the report and document phase is also very important for getting CE certificate. For this reason, being careful when choosing test laboratories, Ege Test Center supports you in EMI Tests with expert teams.
Detailed information and contact
You can contact us by e-mail for detailed information about the EMI Test or you can contact one of our experts by filling out the form at https://en.egetestcenter.com/apply-online/ .
What is VBA 100-3000?
VBA 100-3000 is designed in the Ege Test Center and Vectawave’s 10kHz-100MHz range and is built for EMC Tests, VBA 100-3000 Amplifier is designed for high-performance IT-check usage and amplifier more efficient solutions and special power combining techniques to minimize loss it uses.
VBA100-3000 Interface and Control
The VBA 100-3000 Amplifier can be controlled from the panel on the front panel or remotely controlled by aids such as Ethernet, USB and GPIB interface.
The purpose of the digital user interface is to switch the system management on and off, display the power level, display the power supply life, control computer and electrical application kits, and access and edit them via the control panel display and keyboard.
VBA100-3000 Technical specifications and performance
- High-strength MOSFET silicone-based design
- Manufactured for maximum compliance with Class A,
Further information about VBA100-3000 and purchase
CE certification is required for products to be sold in European Union countries.These products; Not apply to products such as cosmetics, food, textile, etc. required for electrical or electronic products.Products such as medical devices, electronic devices, electrical equipment used in industry. must be certified need to be CE certificates for sale in the EU.
required for electrical or electronic products and A technical file is prepared for the devices and products in this category and after the necessary tests are made, CE stamp is hit. There are product groups for which the CE certificate is valid:
- Low Voltage Devices
- Personel Protection Equipment
- Radio and telecommunications terminal equipment
- Electromagnetic compatibility
- Pressure vessels
- Simple pressure vessels
- Gas burner tools
- Hot water boils
- Noise from the outdoor equipment to the environment
- Energy efficiency in fluorescent lamps
- Active medical devices
- Medical devices
- In vitro medical diagnosis devices
- Sightseeing boats
- Construction materials
- Explosives for civil use
- Non-automatic weighing instruments
- Equipment used in explosive environments
- On cable movement cars for transportation passenger
Within European Union , If a product with a CE certificate is in a high-risk group, it must be approved by third-party organizations. Before placing on the market, high-risk products or product groups Compliance assessment is required by the organizations published in the Official Journal of the EU. Products that have passed this test which must be carried out by notified bodies will be given CE Certificate and CE certificate is not given if the product is likely to create a risk. This criterion is only valid for products with a risk, products do not have to be tested by m notified body other.