{"id":229,"date":"2017-02-07T18:18:17","date_gmt":"2017-02-07T16:18:17","guid":{"rendered":"https:\/\/en.egetestcenter.com\/?p=229"},"modified":"2018-12-20T16:51:34","modified_gmt":"2018-12-20T13:51:34","slug":"2014-30-eu-electromagnetic-compatibility-regulation","status":"publish","type":"post","link":"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/","title":{"rendered":"2014\/30 \/ EU Electromagnetic Compatibility Regulation"},"content":{"rendered":"

ELECTROMAGNETIC COMPATIBILITY REGULATION<\/span><\/p>\n

(2014\/30 \/ AB)<\/span><\/p>\n

FIRST PART<\/span><\/p>\n

Purpose, Scope, Basis and Definitions<\/span><\/p>\n

Goal<\/span><\/strong><\/p>\n

ARTICLE 1 –<\/span><\/strong>\u00a0(1) The purpose of this Regulation is to regulate the electromagnetic compatibility of the equipment and to ensure the functioning of the market in such a way as to comply with an adequate level of electromagnetic compatibility of the equipment.<\/span><\/p>\n

Scope<\/span><\/strong><\/p>\n

ARTICLE 2 –<\/span><\/strong>\u00a0(1) This Regulation covers the equipment described in Article 5.<\/span><\/p>\n

(2) This Regulation;<\/span><\/p>\n

    \n
  1. a) Equipment included in the Radio and Telecommunications Terminal Equipment Regulation published in the Official Gazette dated 24\/3\/2007 and numbered 26472,<\/span><\/li>\n
  2. b) any part of the vehicle, engine, or propeller, including any vehicle, indicator, equipment, mechanism, parts, equipment, hardware or software used or intended to operate or control an aircraft in flight, including aircraft, engines, propeller and communication devices. or the equipment used for maneuvering the aircraft in the ground,<\/span><\/li>\n
  3. c) Radio equipment used by amateur radio, provided that they are not commercially available (all of the components to be fitted by amateur transceivers, commercial equipment modified by amateur radio and modified for use by these amateurs, are not considered commercially available.)<\/span><\/li>\n<\/ol>\n

    d) Equipment that does not have the ability to generate or contribute to electromagnetic emissions that exceed the level enabling the radio and telecommunications equipment and other equipment to operate in a designed manner,<\/span><\/p>\n

      \n
    1. d) Equipment that works without unacceptable performance loss as a result of electromagnetic disturbance due to normal use,<\/span><\/li>\n
    2. e) Evaluation kits specifically designed for professionals in research and development facilities for these purposes,<\/span><\/li>\n<\/ol>\n

      It does not cover.<\/span><\/p>\n

      (3) In the event that the basic requirements laid down in Annex I of the equipment referred to in the first paragraph are more or less regulated in detail in other European Union legislation, this Regulation shall not apply or stop the implementation of this Regulation from the date of entry into force of such legislation.<\/span><\/p>\n

      Rest<\/span><\/strong><\/p>\n

      ARTICLE 3 –<\/span><\/strong>\u00a0(1) This Regulation has been prepared on the basis of the Law No: 4703 dated 29\/6\/2001 on the Preparation and Implementation of Technical Legislation on Products.<\/span><\/p>\n

      Compliance with EU legislation<\/span><\/strong><\/p>\n

      ARTICLE 4 –<\/span><\/strong>\u00a0(1) This Regulation has been prepared within the framework of harmonization with European Union legislation, taking into consideration the European Parliament and Council Directive on Electromagnetic Compatibility dated 26\/2\/2014 and 2014\/30 \/ EC.<\/span><\/p>\n

      Definitions<\/span><\/strong><\/p>\n

      ARTICLE 5 –<\/span><\/strong>\u00a0(1) In this Regulation;<\/span><\/p>\n

        \n
      1. a) EU: European Union,<\/span><\/li>\n
      2. b) Accreditation: an official acceptance by a national accreditation body that a conformity assessment body meets the requirements set out in the relevant national or international standards and the additional requirements laid down in the relevant sectoral regulations to perform a specific conformity assessment activity,<\/span><\/li>\n
      3. c) Immunity: The equipment can be operated as designed without loss of performance during an electromagnetic disturbance,<\/span><\/li>\n<\/ol>\n

        \u00e7) Ministry: Ministry of Science, Industry and Technology,<\/span><\/p>\n

          \n
        1. d) CE marking: A sign indicating that the device complies with all relevant rules of the technical legislation stipulating the CE marking of the device,<\/span><\/li>\n
        2. e) Device: Any equipment or a combination of these devices intended for the final user, which is intended for the final user and which is intended to be fitted to the device by the end user, which is likely to be affected by electromagnetic disturbance or deterioration of performance. The equipment which is defined as the combination of the components or sub-components which are likely to be affected by the deterioration and the combination of the devices as defined by the device, and the devices intended for movement and operation in certain places are also considered within this scope.)<\/span><\/li>\n
        3. f) Distributor: Any natural or legal person other than a manufacturer or importer who has a device involved in the supply chain,<\/span><\/li>\n
        4. g) Hardware: Any device or fixed installation,<\/span><\/li>\n<\/ol>\n

          i) Electromagnetic disturbance: electromagnetic noise, an unwanted signal or a change in the spreading environment itself, which may degrade the performance of the equipment,<\/span><\/p>\n

            \n
          1. h) Electromagnetic environment: All electromagnetic phenomena that can be observed in a certain place,<\/span><\/li>\n<\/ol>\n

            i) Electromagnetic compatibility: The ability of the equipment to work satisfactorily in the electromagnetic environment of the equipment without causing electromagnetic disturbance which cannot be tolerated,<\/span><\/p>\n

              \n
            1. i) Recall: Any measures for the return of a device already in possession of the end user,<\/span><\/li>\n
            2. j) Security purposes: Objectives for the safety of life and property,<\/span><\/li>\n
            3. k) Economic operator: Manufacturer, authorized representative, importer and distributor,<\/span><\/li>\n
            4. l) Manufacturer: any natural or legal person who manufactures or markets the device under its own name or trademark under the design or manufacture of the device,<\/span><\/li>\n
            5. m) Importer: by importing products from overseas who supply to the market a natural or legal person resident in Turkey,<\/span><\/li>\n
            6. n) Commission: The European Commission,<\/span><\/li>\n
            7. o) Availability on the market: provision of the devices to the market for distribution, consumption or use at a price or free of charge through a commercial activity,<\/span><\/li>\n<\/ol>\n

              d) Attract from the market: any measure aimed at preventing the supply chain equipment from being placed on the market,<\/span><\/p>\n

                \n
              1. p) Supply to the market: the first time a device is available in the market,<\/span><\/li>\n
              2. r) Fixed installation: A certain combination of various types of devices that are installed, installed and intended to be used in a predetermined place, and where applicable, other devices,<\/span><\/li>\n
              3. s) Technical specification: A document specifying the technical requirements that must be in the equipment,<\/span><\/li>\n<\/ol>\n

                \u015f) T\u00dcRKAK: Turkish Accreditation Agency,<\/span><\/p>\n

                  \n
                1. t) conformity assessment body: the organization performing conformity assessment activities, including calibration, testing, certification and inspection,<\/span><\/li>\n
                2. u) Conformity assessment: The process indicating the fulfillment of the basic requirements of this Regulation regarding the device,<\/span><\/li>\n<\/ol>\n

                  \u00fc) Harmonized standard: a European standard adopted pursuant to the Commission’s request for implementing the harmonized European Union legislation,<\/span><\/p>\n

                    \n
                  1. v) Member State: Member State of the European Union,<\/span><\/li>\n
                  2. y) Authorized representative: Regarding certain tasks from one manufacturer has received a written mandate to act on behalf of any natural or legal person resident in Turkey,<\/span><\/li>\n<\/ol>\n

                    expresses<\/span><\/p>\n

                    SECOND PART<\/span><\/p>\n

                    Basic Requirements, Commercialization and \/ or Servicing,<\/span><\/p>\n

                    Free Movement of Equipment<\/span><\/p>\n

                    Basic requirements<\/span><\/strong><\/p>\n

                    ARTICLE 6 –<\/span><\/strong>\u00a0(1) The equipment shall meet the basic requirements set out in Annex-I.<\/span><\/p>\n

                    Presence and \/ or service on the market<\/span><\/strong><\/p>\n

                    ARTICLE 7 –<\/span><\/strong>\u00a0(1) The Ministry shall take all necessary measures to ensure that the equipment is properly installed, maintained, used for the purpose of use, and in compliance with this Regulation, in the market and \/ or put into service.<\/span><\/p>\n

                    Free movement of equipment<\/span><\/strong><\/p>\n

                    ARTICLE 8 –<\/span><\/strong>\u00a0(1) The Ministry shall not prevent the presence and \/ or availability of the equipment in accordance with this Regulation for reasons related to electromagnetic compatibility.<\/span><\/p>\n

                    (2) The requirements of this Regulation do not preclude the implementation of the following special measures concerning the introduction or use of the equipment:<\/span><\/p>\n

                      \n
                    1. a) Measures to overcome the current or projected electromagnetic compatibility problem in a particular area.<\/span><\/li>\n
                    2. (b) Measures taken for safety reasons to protect national communication networks or receiver and transmitter stations where they are used for safety purposes in well-defined spectrum situations.<\/span><\/li>\n<\/ol>\n

                      (3) 03.04.2002 dated and 24 715 numbered Official of the published Technical Regulations Gazette and Standards notified to Turkey with the Regulation without prejudice on the Statement between the European Union and the Commission through the Ministry of Economy Ministry this special measures and EU member states.<\/span><\/p>\n

                      (4) In the event of trade fairs, exhibitions or similar activities, equipment that does not comply with the requirements in this Regulation shall be allowed to be shown and \/ or exhibited, provided that a clear indication of whether the equipment cannot be put on the market and \/ or put into service until such time as the equipment is made in compliance with the requirements specified in this Regulation.\u00a0The demonstration can only be carried out if appropriate measures are taken to prevent electromagnetic disturbance.<\/span><\/p>\n

                      THIRD PART<\/span><\/p>\n

                      Obligations of Economic Operators<\/span><\/p>\n

                      Manufacturer’s obligations<\/span><\/strong><\/p>\n

                      ARTICLE 9 –<\/span><\/strong>\u00a0(1) Manufacturers shall ensure that the device is designed and manufactured in accordance with the basic requirements set out in Annex-I while placing the device on the market.<\/span><\/p>\n

                      (2) Manufacturers shall regulate the technical file referred to in Annex II or Annex III, and apply or enforce the relevant conformity assessment procedure referred to in Article 16.\u00a0Where the conformity of the device with the safety requirements set out in Annex I is demonstrated by a conformity assessment procedure, manufacturers shall issue an EC declaration of conformity and affix the CE marking.<\/span><\/p>\n

                      (3) Manufacturers maintain the technical dossier and the EU declaration of conformity for a period of 10 years from the date on which the device was placed on the market.<\/span><\/p>\n

                      (4) Manufacturers ensure that the device complies with this Regulation throughout serial production.\u00a0It follows the changes in device design or features and the changes in harmonized standards or other technical specifications, which are the basis for declaring the conformity of the device.<\/span><\/p>\n

                      (5) Manufacturers, the device they are placed on the market;\u00a0recognizes a type, batch or serial number, or any other element which will allow it to be located on the device, in the case where the device size or structure does not permit this information to be found in the packaging of the device or in a document supplied with the device.<\/span><\/p>\n

                      (6) Manufacturers specify their names, registered trade names or registered trademarks and their addresses on the product on the device or, where this is not possible, in the device packaging or in a document supplied with the device.\u00a0Only one address that can be contacted with the manufacturer is shown.\u00a0Contact information must be in a language that Turkish or end users will understand and which the Ministry will accept.<\/span><\/p>\n

                      (7) The manufacturers ensure that the instructions and safety information are supplied in Turkish with the device.\u00a0Such instructions and safety information and all labels must be clear, understandable and legible.<\/span><\/p>\n

                      (8) Where a device they are placing on the market must know or know that it is not in compliance with this Regulation, manufacturers shall immediately take the necessary corrective measures in order to make the device available, to withdraw from the market or to recall it when necessary.\u00a0Furthermore, where the device poses a risk, the manufacturer shall inform the Ministry in detail and immediately with regard to all corrective measures taken, in particular by nonconformity.<\/span><\/p>\n

                      (9) The manufacturers shall submit all necessary information and documents to the Ministry in printed or electronic form, in Turkish or in a language to be accepted by the Ministry, on a justified request, indicating the conformity of the device with this Regulation.\u00a0The manufacturers cooperate with the Ministry in the activities carried out in order to eliminate the risks of the devices they are placed on the market.<\/span><\/p>\n

                      Authorized representatives<\/span><\/strong><\/p>\n

                      ARTICLE 10 –<\/span><\/strong>\u00a0(1) Manufacturers may appoint an authorized representative with a written authorization certificate.\u00a0The obligations set forth in the first paragraph of Article 9 and the obligation to prepare the technical files specified in the second paragraph of Article 9 shall not be among the powers of the authorized representative.<\/span><\/p>\n

                      (2) The authorized representative shall perform the duties specified in the authorization document obtained from the manufacturer.\u00a0The authorization certificate and the authorized representative are allowed to:<\/span><\/p>\n

                        \n
                      1. a) to maintain the EU declaration of conformity and the technical dossier for a period of 10 years from the date the device is placed on the market in order to submit it to the Ministry.<\/span><\/li>\n
                      2. b) To submit to the Ministry all necessary information and documents to prove the suitability of the device upon the justified request.<\/span><\/li>\n
                      3. c) to cooperate with the Ministry in case of a request by the authorized representative regarding any measures taken to eliminate the risks posed by the device contained in the authorization document.<\/span><\/li>\n<\/ol>\n

                        Obligations of importers<\/span><\/strong><\/p>\n

                        ARTICLE 11 –<\/span><\/strong>\u00a0(1) Importers shall only place the devices in accordance with this Regulation on the market.<\/span><\/p>\n

                        (2) Importers shall ensure that the manufacturer has performed the necessary conformity assessment procedure specified in Article 16 before placing the devices on the market.\u00a0Since the manufacturer arranges the technical dossier, it carries the CE marking of the device and makes sure that the necessary documents are supplied with the device and that the manufacturer fulfills the requirements set out in the fifth and sixth paragraphs of Article 9.\u00a0The importer cannot place the device on the market without proper adaptation, if the device knows or needs to know that the device does not comply with the essential requirements set out in Annex-I.\u00a0In addition, if the device constitutes a risk, the importer informs the manufacturer and the Ministry.<\/span><\/p>\n

                        (3) Importers shall specify their names, registered trademarks or registered trademarks, and any addresses on the product that may be contacted on the device, if this is not possible, in the device packaging or in a document supplied with the device.\u00a0The contact information must be in a language that the Turkish or end users can easily understand and which the Ministry will accept.<\/span><\/p>\n

                        (4) Importers shall ensure that the instructions and information referred to in Article 20 are provided in Turkish with the device.<\/span><\/p>\n

                        (5) Importers prevent the storage and transport conditions from jeopardizing the compliance with the essential requirements laid down in Annex I while the device is under its responsibility.<\/span><\/p>\n

                        (6) In the event that a device they are placing on the market knows or needs to know is not in compliance with this Regulation, importers shall immediately take the necessary corrective measures in order to make the device available, to withdraw from the market or to recall it when necessary.\u00a0Furthermore, in cases where the device poses a risk, the importers shall inform the Ministry in detail and immediately about all corrective measures taken, in particular by non-compliance.<\/span><\/p>\n

                        (7) Importers shall keep a copy of the EU declaration of conformity for a period of 10 years from the date on which the device is placed on the market and to submit the technical file to the Ministry upon request.<\/span><\/p>\n

                        (8) Importers, upon the reasoned request, shall submit all information and documents indicating that the device is in compliance with this Regulation in a printed or electronic form in Turkish or in a language the Ministry shall accept.\u00a0Importers shall cooperate with the Ministry upon request for activities carried out in order to eliminate the risks of the devices that are placed on the market.<\/span><\/p>\n

                        Obligations of distributors<\/span><\/strong><\/p>\n

                        ARTICLE 12 –<\/span><\/strong>\u00a0(1) Distributors shall act with due diligence in terms of the requirements of this Regulation while keeping the device on the market.<\/span><\/p>\n

                        (2) Distributors shall bear the CE marking before the device is placed on the market, the necessary documents and the instructions and other information specified in Article 20 are provided with the device in Turkish, verifies the fulfillment.\u00a0The distributor cannot store the device in the market without proper adaptation, if the device knows or needs to know that it is not in accordance with the essential requirements set out in Annex-I.\u00a0In addition, when the device is at risk, the distributor shall inform the manufacturer or importer and also the Ministry.<\/span><\/p>\n

                        (3) Distributors shall ensure that the storage and transportation conditions do not jeopardize compliance with the essential requirements laid down in Annex I when the device is under its responsibility.<\/span><\/p>\n

                        (4) In the event that the devices they know on the market know or need not know that they are not in compliance with the requirements of this Regulation, distributors shall ensure that corrective measures are taken to ensure that the device in question is in compliance with the requirements of this Regulation.\u00a0In addition, in cases where the device poses a risk, the distributors shall inform the Ministry in detail and immediately about any non-compliance and all corrective measures taken.<\/span><\/p>\n

                        (5) Distributors shall provide to the Ministry in printed or electronic form all the information and documents indicating the conformity of the device with this Regulation on the reasoned request.\u00a0Distributors, if requested, cooperate with the Ministry on any measures taken to eliminate the risks posed by the device they hold on the market.<\/span><\/p>\n

                        Where manufacturers’ obligations apply to importers and distributors<\/span><\/strong><\/p>\n

                        ARTICLE 13 –<\/span><\/strong>\u00a0(1) An importer or distributor who submits a device to the market under its own name or trademark and changes it in such a way as to affect its conformity with the requirements of this Regulation, is considered a manufacturer or distributor for the purposes of this Regulation and the manufacturer is subject to his obligations.<\/span><\/p>\n

                        Identifying the identity of economic operators<\/span><\/strong><\/p>\n

                        ARTICLE 14 –<\/span><\/strong>\u00a0(1) The economic operators shall provide the Ministry with information regarding the identification of the following:<\/span><\/p>\n

                          \n
                        1. a) All economic operators who supply equipment to them.<\/span><\/li>\n
                        2. b) All economic operators which are supplied by the device.<\/span><\/li>\n<\/ol>\n

                          (2) Economic operators must be able to provide the information specified in the first paragraph for 10 years after the device has been supplied to them and for 10 years after supplying the device.<\/span><\/p>\n

                          SECTION FOUR<\/span><\/p>\n

                          Availability of Equipment<\/span><\/p>\n

                          Assumption of hardware compatibility<\/span><\/strong><\/p>\n

                          ARTICLE 15 –<\/span><\/strong>\u00a0(1) The products in accordance with the harmonized standards whose reference numerals have been published in the Official Journal of the European Union or the corresponding Harmonized Turkish Standards or related parts thereof shall be deemed to comply with the essential requirements laid down in Annex-1 under these standards or relevant sections.<\/span><\/p>\n

                          Compliance assessment procedures for devices<\/span><\/strong><\/p>\n

                          ARTICLE 16 –<\/span><\/strong>\u00a0(1) The conformity of the devices with the basic requirements set out in Annex I is proved by one of the following two conformity assessment procedures:<\/span><\/p>\n

                            \n
                          1. a) Internal control of production in Annex II.<\/span><\/li>\n
                          2. b) an EU-type review set out in Annex III, following a conformity assessment based on internal control of production.<\/span><\/li>\n<\/ol>\n

                            (2) The manufacturer may choose to restrict the application of the procedure referred to in paragraph (b) of this Article to certain aspects of the essential requirements, but for other aspects of the basic requirements the application of the procedure in subparagraph (a) of the first paragraph is required.<\/span><\/p>\n

                            EU declaration of conformity<\/span><\/strong><\/p>\n

                            ARTICLE 17 –<\/span><\/strong>\u00a0(1) The EU declaration of conformity means that the essential requirements laid down in Annex-I have been fulfilled.<\/span><\/p>\n

                            (2) The EC declaration of conformity shall be regulated and updated continuously, as specified in Annex IV, including the matters specified in Annex-II and Annex III.\u00a0In the case of other languages, the Turkish translation of the EU declaration of conformity is also included.<\/span><\/p>\n

                            (3) If the instrument is subject to more than one legislation requiring an EC declaration of conformity, a single EU declaration of conformity shall be drawn up for the entire legislation.\u00a0The EU declaration of conformity includes the name of the legislation, the date of publication and a description of the relevant legislation, including publication references.<\/span><\/p>\n

                            (4) It is assumed that the manufacturer assumes responsibility for the conformity of the device with the requirements set forth in this Regulation together with the regulation of the EU declaration of conformity.<\/span><\/p>\n

                            General principles of CE marking<\/span><\/strong><\/p>\n

                            ARTICLE 18 –<\/span><\/strong>\u00a0(1) The CE marking is subject to the principles set out in the ve CE tarihli Sign Regulation, which was put into force by the Council of Ministers Decree No. 2011\/2588, dated 16\/12\/2011.<\/span><\/p>\n

                            Terms and conditions for affixing CE marking<\/span><\/strong><\/p>\n

                            ARTICLE 19 –<\/span><\/strong>\u00a0(1) The CE marking shall be attached to the device or its data plate in a visible, readable and non-erasable manner.\u00a0If this is not possible or cannot be guaranteed due to the structure of the device, the mark is attached to the product packaging and the accompanying documentation.<\/span><\/p>\n

                            (2) The CE marking shall be attached before the device is placed on the market.<\/span><\/p>\n

                            (3) The Ministry shall rely on existing practices to ensure correct implementation of the process for affixing the CE marking and shall intervene in the event of improper use of this mark.<\/span><\/p>\n

                            Information on using the device<\/span><\/strong><\/p>\n

                            ARTICLE 20 –<\/span><\/strong>\u00a0(1) In order to ensure that the device complies with the basic requirements set out in Annex I when the appliance is serviced, information on all specific measures to be taken during installation, installation, maintenance or use of the device is provided.<\/span><\/p>\n

                            (2) A clear statement of such a use restriction shall be included with the device which is not available in residential areas in accordance with the essential requirements set out in Annex I.\u00a0This statement is also included on the packaging if appropriate.<\/span><\/p>\n

                            (3) The information required to ensure proper use of the device is included in the instructions supplied with the device.<\/span><\/p>\n

                            Fixed installations<\/span><\/strong><\/p>\n

                            ARTICLE 21 –<\/span><\/strong>(1) The devices available on the market and which may be included in a fixed installation shall be subject to all relevant provisions specified in this Regulation.\u00a0However, the requirements of Article 6, Articles 9 to 14 and Articles 16 to 20 shall not be obligatory in the case of devices designed for inclusion in a particular fixed installation and which are not otherwise available.\u00a0In such cases, the accompanying documentation refers to the fixed installation and its electromagnetic compatibility characteristics and, in order not to compromise the suitability of the installation in question, indicate the measures to be taken to incorporate the device into the fixed installation.\u00a0The documents shall contain the information referred to in the fifth and sixth paragraph of Article 9 and the third paragraph of Article 11.\u00a0Good engineering practices specified in Annex I are documented and related documents,<\/span><\/p>\n

                            (2) If there are indications of nonconformity of the fixed installation, in particular where there are complaints about the disturbances caused by the installation, the Ministry may request proof of the suitability of the fixed installation and may initiate an evaluation when necessary.\u00a0In the case of non-compliance, the Ministry may require that appropriate measures be taken to comply with the basic requirements set out in Annex-I.<\/span><\/p>\n

                            (3) The Ministry shall issue the necessary provisions to determine the person or persons responsible for establishing the conformity of a fixed installation with the relevant essential requirements.<\/span><\/p>\n

                            SECTION FIVE<\/span><\/p>\n

                            Conformity Assessment Organizations<\/span><\/p>\n

                            Notification<\/span><\/strong><\/p>\n

                            ARTICLE 22 –<\/span><\/strong>\u00a0(1) The Ministry shall inform the Commission and the member states of the EU through the Ministry of Economy, under this Regulation, the authorities authorized to carry out third party conformity assessment duties.<\/span><\/p>\n

                            Authorized body<\/span><\/strong><\/p>\n

                            ARTICLE 23 –<\/span><\/strong>\u00a0(1) The Ministry is authorized to regulate and implement the procedures for the evaluation and appointment of the conformity assessment bodies, including compliance with Article 28, and for the supervision and enforcement of such bodies.<\/span><\/p>\n

                            Principles of the competent authority<\/span><\/strong><\/p>\n

                            ARTICLE 24 –<\/span><\/strong>\u00a0(1) Procedures for the appointment, evaluation and monitoring of conformity assessment bodies;<\/span><\/p>\n

                              \n
                            1. a) no conflict of interest with the conformity assessment bodies,<\/span><\/li>\n
                            2. b) Within the framework of impartiality,<\/span><\/li>\n
                            3. c) To ensure that the personnel to make decisions regarding the assignment of the conformity assessment bodies and the personnel to evaluate these institutions shall be different,<\/span><\/li>\n<\/ol>\n

                              \u00e7) In such a way that the activities or consultancy services performed by conformity assessment bodies shall not be presented in a commercial or competitive manner,<\/span><\/p>\n

                                \n
                              1. d) Maintaining the confidentiality of the information obtained,<\/span><\/li>\n
                              2. e) by employing sufficient number of qualified personnel, who are required to carry out the tasks<\/span><\/li>\n<\/ol>\n

                                Executed.<\/span><\/p>\n

                                Obligation to inform<\/span><\/strong><\/p>\n

                                ARTICLE 25 –<\/span><\/strong>\u00a0(1) The Ministry shall inform the Commission, through the Ministry of Economy, of the principles regarding the evaluation and assignment of the qualifications of the conformity assessment bodies and the monitoring principles of the notified bodies and any amendments to these principles.<\/span><\/p>\n

                                Requirements for notified bodies<\/span><\/strong><\/p>\n

                                ARTICLE 26 –<\/span><\/strong>\u00a0(1) The following qualifications shall be sought in the conformity assessment body to be appointed as notified body.<\/span><\/p>\n

                                (2) The conformity assessment body shall be established in accordance with national legislation and shall be legal entity.<\/span><\/p>\n

                                (3) the conformity assessment body, will evaluate the device or the institution \/ company must be from an independent third-party organization.\u00a0The design of the device on which to evaluate, manufacture, supply, installation, use or an industry representing companies involved in the maintenance, commerce, chambers of commerce, unions or associations or professional federations to a subsidiary, independence and provided to prove that there is no conflict of interest is considered third party organizations It may be.<\/span><\/p>\n

                                (4) The top executives of a conformity assessment body and the personnel responsible for carrying out the conformity assessment tasks shall not be the designer, manufacturer, supplier, installer, recipient, owner, user or maintainer of the devices they are evaluating or the representative of any of them.\u00a0This does not preclude the use of the devices required for the work of the conformity assessment body or the use of such devices for personal purposes.\u00a0A conformity assessment body, its top executives and their personnel responsible for carrying out their conformity assessment duties cannot be directly involved in the design, manufacture, construction, marketing, installation, use or maintenance of such devices or represent the parties performing such activities.\u00a0These organizations,\u00a0they cannot engage in any activity that may adversely affect the fulfillment of the independence of the decision-making and the fulfillment of the requirements of the profession.\u00a0This also applies to consulting services.\u00a0Conformity assessment bodies prevent activities carried out by branches, representative offices or contractors from affecting the confidentiality, objectivity or impartiality of their conformity assessment activities.<\/span><\/p>\n

                                (5) Conformity assessment bodies and their staff shall carry out their conformity assessment activities with a high level of technical competence and professional equipment, and at the end of such activities, in particular when making decisions on financial matters, the moves independently.<\/span><\/p>\n

                                (6) The conformity assessment body shall have the capacity to carry out all conformity assessment tasks assigned to it by Annex III, whether carried out by the conformity assessment body itself or under its responsibility.\u00a0The conformity assessment body must always have the following mandatory requirements for each conformity assessment procedure and for each device category and type for which it is authorized:<\/span><\/p>\n

                                  \n
                                1. a) Personnel with adequate and appropriate experience to the technical knowledge to perform the conformity assessment tasks.<\/span><\/li>\n
                                2. (b) appropriate policies and procedures to ensure the transparency or reproducibility of conformity assessment procedures, the disclosures of procedures taken into account when conducting conformity assessment, and the distinction between duties undertaken by the conformity assessment body as a notified body and other activities;<\/span><\/li>\n
                                3. c) The size of the work it is undertaking, the sector in which it operates, the organizational structure, the technology complexity of the product in question, and the methods required for the realization of the activities that take into account the volume or character of the production process.<\/span><\/li>\n<\/ol>\n

                                  (d) have the means necessary to properly implement the technical and administrative tasks associated with conformity assessment activities;\u00a0access to all necessary equipment or facilities.<\/span><\/p>\n

                                  (7) The personnel responsible for carrying out the conformity assessment activities must have the following conditions:<\/span><\/p>\n

                                    \n
                                  1. a) An adequate technical and vocational training covering all of the conformity assessment activities in which the conformity assessment body is assigned as a notified body.<\/span><\/li>\n
                                  2. b) sufficient knowledge of the requirements of the assessments they made and the authority required to make these assessments.<\/span><\/li>\n
                                  3. (c) Appropriate harmonized standards and relevant knowledge of the applicable harmonized standards and relevant provisions of the EU legislation and national legislation laid down in Annex I;<\/span><\/li>\n<\/ol>\n

                                    \u00e7) The adequacy of issuing certificates, records and reports proving that the activities carried out are carried out.<\/span><\/p>\n

                                    (8) The conformity assessment bodies responsible for carrying out the conformity assessment activities shall guarantee the impartiality of the senior management and personnel of such organizations.\u00a0The top executives of a conformity assessment body and the remuneration of staff responsible for carrying out the conformity assessment tasks may not depend on the number of assessments made or the results of such assessments.<\/span><\/p>\n

                                    (9) If the responsibility is not undertaken by the public under national legislation or the Ministry itself is not directly responsible for conformity assessment, conformity assessment bodies shall have professional liability insurance.<\/span><\/p>\n

                                    (10) The staff of the conformity assessment body shall maintain professional confidentiality with respect to all information obtained during the performance of their duties under the provisions of Annex III or any provision referred to by national legislation, except in the case of the Ministry.\u00a0Property rights are protected.<\/span><\/p>\n

                                    (11) Conformity assessment bodies shall participate in the activities of the group established under the relevant technical regulation by the EU for the relevant standardization activities and the coordination of the notified bodies or ensure that the personnel conducting the evaluation activities are aware of these activities.\u00a0The documents prepared by the decisions of the group formed for the coordination of the notified bodies are used as guidance guide.<\/span><\/p>\n

                                    Conformity assumption of notified bodies<\/span><\/strong><\/p>\n

                                    ARTICLE 27 –<\/span><\/strong>\u00a0(1) A conformity assessment body shall be deemed to comply with the requirements laid down in Article 26 if the reference numbers in the Official Journal of the European Union prove that the reference numbers have been complied with the criteria laid down in the harmonized standards or their respective sections of the published harmonized standards.<\/span><\/p>\n

                                    Branches, representative offices and subcontractors of notified bodies<\/span><\/strong><\/p>\n

                                    ARTICLE 28 –<\/span><\/strong>\u00a0(1) If the notified body submits certain duties related to the conformity assessment to the subcontractor or uses a branch \/ agency for these activities, it shall ensure that the organization, subcontractor or branch \/ agency meets the requirements set forth in Article 26 and Informs the Ministry.<\/span><\/p>\n

                                    (2) Notified bodies shall take full responsibility for the tasks performed by subcontractors or branches \/ representations where such tasks have been established.<\/span><\/p>\n

                                    (3) The activities to be carried out by the notified bodies may only be made available to a subcontractor if approved by the customer or may be performed by a branch \/ agency.<\/span><\/p>\n

                                    (4) The notified bodies shall retain the documents relating to the evaluation of the nature of the subcontractor or the branch \/ agency and the evaluation of the activities carried out by them in Annex III, when necessary, to submit to the Ministry.<\/span><\/p>\n

                                    Notification application<\/span><\/strong><\/p>\n

                                    ARTICLE 29 –<\/span><\/strong>\u00a0(1) built-appointed as notified body of conformity assessment bodies who wish to apply to the Ministry in Turkey.<\/span><\/p>\n

                                    (2) Council of Ministers dated 16\/12\/2011 and no. 2011\/2621 proving that the conformity assessment activities, the conformity assessment module or modules and the necessary information about the device and the conformity assessment body, if they have stated that they are competent together with the application document, meet the requirements set forth in Article 26 An accreditation certificate issued within the framework of the seventh paragraph of Article 4 of the Regulation on Conformity Assessment Bodies and Notified Bodies which are put into force by the decision is submitted.<\/span><\/p>\n

                                    Notification process<\/span><\/strong><\/p>\n

                                    ARTICLE 30 –<\/span><\/strong>\u00a0(1) The Ministry may only appoint conformity assessment bodies that meet the requirements set out in Article 26 as a notified body.<\/span><\/p>\n

                                    (2) The Ministry shall inform the Commission and the member countries of the EU through the Ministry of Economy through the approval of the Ministry of Economy.\u00a0The notification is made using the EU’s New Approach Notified Bodies Information System.<\/span><\/p>\n

                                    (3) The notification includes all details on conformity assessment activities, relevant conformity assessment modules \/ modules, device and also the competence of the organization.<\/span><\/p>\n

                                    (4) In two weeks from the date of notification to the Commission of the notified body candidate with an accreditation certificate, the Commission or the EU Member States may request or appeal additional information on the adequacy of the notified body candidate notified.\u00a0Following the allocation of an identity registration number by the Commission to the notified conformity assessment body, the Ministry appoints this body as notified body.<\/span><\/p>\n

                                    (5) The Ministry shall inform the Commission and EU Member States through the Ministry of Economy of any changes in the activities and characteristics of the notified body.<\/span><\/p>\n

                                    Appointment of notified bodies<\/span><\/strong><\/p>\n

                                    ARTICLE 31 –<\/span><\/strong>\u00a0(1) After the Commission has assigned an identity registration number to the declared conformity assessment body, the Ministry shall appoint this body as notified body.<\/span><\/p>\n

                                    Changes in assignments<\/span><\/strong><\/p>\n

                                    ARTICLE 32 –<\/span><\/strong>\u00a0(1) In the event that the Ministry determines that the notified body no longer meets the requirements set out in Article 26 or is unable to meet its obligations or is informed about it, the Ministry shall restrict, suspend or puts an end to its status.\u00a0The Ministry shall immediately inform the Commission and the EU Member States of this matter through the Ministry of Economy.<\/span><\/p>\n

                                    (2) The Ministry shall process its records and documents related to the conformity assessment procedures performed by the notified body, whose activities are restricted, suspended, the status of the notified body has been terminated, or terminated at the request of the institution, or take appropriate measures to ensure that the Ministry shall, if requested, ensure that it is kept available to the Ministry.<\/span><\/p>\n

                                    Objection to the competence of notified bodies<\/span><\/strong><\/p>\n

                                    ARTICLE 33 –<\/span><\/strong>\u00a0(1) The Ministry shall inform the Ministry of Economy, upon request, of all information that constitutes the basis for the appointment of the notified body or that it maintains its sufficiency.<\/span><\/p>\n

                                    (2) The Ministry Commission or EU member which commissioned the Ministry of one of the countries with a notified body’s technical competence and the case of a request for the examination of compliance with regulations, 1\/2006 dated the Turkey-EU Association Council of follow procedures specified in Article 4.<\/span><\/p>\n

                                    Liabilities related to the activities of the notified bodies<\/span><\/strong><\/p>\n

                                    ARTICLE 34 –<\/span><\/strong>\u00a0(1) The notified body shall carry out its conformity assessments in accordance with the conformity assessment procedure specified in Annex III.<\/span><\/p>\n

                                    (2) Conformity assessments shall be carried out in such a way that they do not create unnecessary burden for economic operators.\u00a0Conformity assessment bodies shall be responsible for;\u00a0the size of the work, the sector in which it operates, the complexity of the technology of the device in question, and the volume or character of the production process.\u00a0In doing so, it also considers the level of protection and the degree of care required for the conformity of the device in this Regulation.<\/span><\/p>\n

                                    (3) If the notified body establishes that the essential requirements laid down in Annex I have not been met by a manufacturer of the relevant harmonized standards or technical specifications, it shall require the manufacturer in question to take appropriate corrective measures and shall not issue a certificate of conformity.<\/span><\/p>\n

                                    (4) The notified body shall ask the manufacturer to take appropriate corrective measures and, if necessary, suspend or withdraw the document if it determines that a device is no longer available during the follow-up of compliance with a certificate.<\/span><\/p>\n

                                    (5) Where corrective measures are not taken or are not taking the desired effect, the notified body shall, accordingly, restrict, suspend or withdraw all relevant documents.<\/span><\/p>\n

                                    Objections to the decisions of the notified bodies<\/span><\/strong><\/p>\n

                                    ARTICLE 35 –<\/span><\/strong>\u00a0(1) The Ministry shall ensure that an appeal mechanism exists against the decisions of the notified bodies.<\/span><\/p>\n

                                    Obligation of notified bodies to provide information<\/span><\/strong><\/p>\n

                                    ARTICLE 36 –<\/span><\/strong>\u00a0(1) Notified bodies shall inform the Ministry about:<\/span><\/p>\n

                                      \n
                                    1. a) Denial, restriction, suspension or withdrawal of a document.<\/span><\/li>\n
                                    2. b) any situation that affects the scope and conditions of the notification.<\/span><\/li>\n
                                    3. c) any information request received from the Ministry in relation to conformity assessment activities.<\/span><\/li>\n<\/ol>\n

                                      d) Conformity assessment activities carried out within the scope of cross-border activities and any other activity, including submission of a job to the subcontractor.<\/span><\/p>\n

                                      (2) Notified bodies shall provide information to other notified bodies which carry out similar conformity assessment activities for the same device, which are assigned within the scope of this Regulation, and give information about the conformity assessment procedures that have resulted in a favorable outcome.<\/span><\/p>\n

                                      Coordination of notified bodies<\/span><\/strong><\/p>\n

                                      ARTICLE 37 –<\/span><\/strong>\u00a0(1) Notified bodies shall be represented or represented in the committees and working groups established by the Ministry and the Commission.<\/span><\/p>\n

                                      SECTION SIX<\/span><\/p>\n

                                      Market Surveillance and Control<\/span><\/p>\n

                                      Safeguards Procedure<\/span><\/p>\n

                                      Market surveillance and control of devices<\/span><\/strong><\/p>\n

                                      ARTICLE 38 –<\/span><\/strong>\u00a0(1) The provisions of the Regulation on Market Surveillance of Products which are put into force by the Council of Ministers Decree no. 2001\/3529 dated 13\/11\/2001 shall be applied in the market surveillance and supervision of the devices.<\/span><\/p>\n

                                      Procedures for products at national level<\/span><\/strong><\/p>\n

                                      ARTICLE 39 –<\/span><\/strong>(1) If the Ministry has a justification that a device within the scope of this Regulation constitutes a risk to the protection of the public good within the scope of this Regulation, the Ministry shall make an assessment covering all the requirements of this Regulation in relation to the device in question.\u00a0The relevant economic operators cooperate with the Ministry for this purpose.\u00a0In the event that the Ministry has determined that, as a result of the evaluation, the device does not comply with the requirements laid down in this Regulation, it shall promptly take all appropriate corrective measures to ensure that the relevant economic operator complies with the requirements in a reasonable time in proportion to the nature of the risk, withdraw from the prompts\u00a0Ministry,<\/span><\/p>\n

                                      (2) For the measures included in the first paragraph, the provisions of the Regulation on Market Surveillance and Control of Products and the Regulation on Market Surveillance and Control of the Ministry of Science, Industry and Technology published in the Official Gazette dated 2\/10\/2012 and numbered 28429 are applicable.<\/span><\/p>\n

                                      (3) If the Ministry considers that the non-conformity is not limited to the country, it shall inform the Commission and the EU Member States through the Ministry of Economy of the results of the assessment and the measures they require from the economic operators.<\/span><\/p>\n

                                      (4) The economic operator shall ensure that appropriate corrective measures are taken for all devices in the market.<\/span><\/p>\n

                                      (5) In case the relevant economic operator does not take adequate corrective measures within the period specified in the first paragraph, the Ministry shall take all appropriate interim measures to prohibit or restrict the device from being placed on the market, to withdraw from the market or to recall them.\u00a0The Ministry shall inform the Commission and the EU Member States immediately of these measures through the Ministry of Economy.<\/span><\/p>\n

                                      (6) The information referred to in paragraph 5 of this Article shall contain all available details, in particular the data necessary for the identification of non-conforming devices, the origin of the devices, the nature of the alleged nonconformity and the nature of the risk in question, the nature and duration of the measures taken and the economic operator concerned; contains arguments.\u00a0In particular, the Ministry indicates whether non-compliance is caused by one of the following reasons:<\/span><\/p>\n

                                        \n
                                      1. a) The device does not meet the requirements for the protection of the public interest contained in this Regulation.<\/span><\/li>\n
                                      2. (b) Deficiencies in the harmonized standards adopted as the conformity assumption referred to in Article 15.<\/span><\/li>\n<\/ol>\n

                                        (7) The Ministry shall adopt a measure and any additional information in its possession that it has agreed to apply the non-conformity of the device in respect of the information transmitted by the Commission on a procedure initiated in the EU market;\u00a0if they also object to the notified measure, they shall communicate their objections to the Commission and the member states of the European Union through the Ministry of Economy.<\/span><\/p>\n

                                        (8) In the absence of any objection by an EU Member State or Commission against the interim measure taken by the Ministry within three months after the information given in the fifth paragraph of this Article, the measure shall be justified.<\/span><\/p>\n

                                        (9) The Ministry shall ensure that appropriate restrictive measures, such as withdrawal of the device from the market, are received without delay.<\/span><\/p>\n

                                        Safeguards procedure<\/span><\/strong><\/p>\n

                                        ARTICLE 40 –<\/span><\/strong>\u00a0(1) If the objection made by the EU Member States and the Commission against the measure referred to in the fourth and fifth paragraphs of Article 39 shall be objected and the Commission is deemed not based on justified reason, the measure shall be repealed.<\/span><\/p>\n

                                        Non-conformity<\/span><\/strong><\/p>\n

                                        ARTICLE 41 –<\/span><\/strong>\u00a0(1) Without prejudice to Article 39, if the Ministry finds one of the following findings, the Ministry shall ask the economic operator to terminate the non-compliance:<\/span><\/p>\n

                                          \n
                                        1. a) Attach the CE marking in contravention of the general principles laid down in the ayk\u0131r\u0131 CE esas Signs Regulation.<\/span><\/li>\n
                                        2. b) Failure to affix the CE marking.<\/span><\/li>\n
                                        3. c) Not regulating the EU declaration of conformity.<\/span><\/li>\n<\/ol>\n

                                          \u00e7) The EU declaration of conformity is not properly regulated.<\/span><\/p>\n

                                            \n
                                          1. d) missing or missing technical file.<\/span><\/li>\n
                                          2. e) the lack of information, inaccurate or incomplete information contained in the sixth paragraph of Article 9 and in the third paragraph of Article 11.<\/span><\/li>\n
                                          3. (f) the failure to meet any of the requirements of Article 9 or Article 11 except those referred to in paragraph (e).<\/span><\/li>\n<\/ol>\n

                                            (2) If the non-conformance referred to in the first paragraph of this article continues, the Ministry shall take all appropriate measures to restrict or prevent the presence of the device on the market and shall ensure that the device is recalled or withdrawn from the market.<\/span><\/p>\n

                                            CHAPTER SEVEN<\/span><\/p>\n

                                            Miscellaneous and Final Provisions<\/span><\/p>\n

                                            Committee operations<\/span><\/strong><\/p>\n

                                            ARTICLE 42 –<\/span><\/strong>\u00a0(1) The Ministry shall participate in the work of the Electromagnetic Compatibility Committee established by the Commission.<\/span><\/p>\n

                                            Administrative sanctions<\/span><\/strong><\/p>\n

                                            ARTICLE 43 –<\/span><\/strong>\u00a0(1) The provisions of the Law on the Preparation and Implementation of Technical Legislation Regarding the Products No. 4703 shall apply to those who act against the provisions of this Regulation.<\/span><\/p>\n

                                            Authorizing authority<\/span><\/strong><\/p>\n

                                            ARTICLE 44 –<\/span><\/strong>\u00a0(1) The Ministry is authorized to make arrangements regarding the implementation of this Regulation.<\/span><\/p>\n

                                            Repealed regulation<\/span><\/strong><\/p>\n

                                            ARTICLE 45 –<\/span><\/strong>\u00a0(1) The Electromagnetic Compatibility Regulation (2004\/108 \/ EC) published in the Official Gazette dated 24\/10\/2007 and numbered 26680 has been abolished.\u00a0References to the revoked regulation in other regulations shall be deemed to have been made to this Regulation.<\/span><\/p>\n

                                            Passage provision<\/span><\/strong><\/p>\n

                                            PROVISIONAL ARTICLE 1 –<\/span><\/strong>\u00a0(1) The Ministry shall meet the requirements of the Regulation on Electromagnetic Compatibility (2004\/108 \/ EC) published in the Official Gazette dated 24\/10\/2007 and no. does not prevent the presence or placing of the equipment in the market.<\/span><\/p>\n

                                            Force<\/span><\/strong><\/p>\n

                                            ARTICLE 46 –<\/span><\/strong>\u00a0(1) This Regulation shall enter into force on the date of its publication.<\/span><\/p>\n

                                            Executive<\/span><\/strong><\/p>\n

                                            ARTICLE 47 –<\/span><\/strong>\u00a0(1) The provisions of this Regulation are executed by the Minister of Science, Industry and Technology.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

                                            ELECTROMAGNETIC COMPATIBILITY REGULATION (2014\/30 \/ AB) FIRST PART Purpose, Scope, Basis and Definitions Goal ARTICLE 1 –\u00a0(1) The purpose of this Regulation is to regulate the electromagnetic compatibility of the equipment and to ensure the functioning of the market in such a way as to comply with an adequate level of electromagnetic compatibility of the […]<\/p>\n","protected":false},"author":3,"featured_media":245,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[],"yoast_head":"\n2014\/30 \/ EU Electromagnetic Compatibility Regulation • EMC Test Equipments | Chambers | Certifications<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"2014\/30 \/ EU Electromagnetic Compatibility Regulation • EMC Test Equipments | Chambers | Certifications\" \/>\n<meta property=\"og:description\" content=\"ELECTROMAGNETIC COMPATIBILITY REGULATION (2014\/30 \/ AB) FIRST PART Purpose, Scope, Basis and Definitions Goal ARTICLE 1 –\u00a0(1) The purpose of this Regulation is to regulate the electromagnetic compatibility of the equipment and to ensure the functioning of the market in such a way as to comply with an adequate level of electromagnetic compatibility of the […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/\" \/>\n<meta property=\"og:site_name\" content=\"EMC Test Equipments | Chambers | Certifications\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/TestupsTurkey\/\" \/>\n<meta property=\"article:published_time\" content=\"2017-02-07T16:18:17+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2018-12-20T13:51:34+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/en.egetestcenter.com\/wp-content\/uploads\/2017\/02\/yonetmelik.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"864\" \/>\n\t<meta property=\"og:image:height\" content=\"486\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"ETCadmin41\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@testupsturkey\" \/>\n<meta name=\"twitter:site\" content=\"@testupsturkey\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"ETCadmin41\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"34 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/\"},\"author\":{\"name\":\"ETCadmin41\",\"@id\":\"https:\/\/en.egetestcenter.com\/#\/schema\/person\/95a2fae34598c5492c375b720e92921d\"},\"headline\":\"2014\/30 \/ EU Electromagnetic Compatibility Regulation\",\"datePublished\":\"2017-02-07T16:18:17+00:00\",\"dateModified\":\"2018-12-20T13:51:34+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/\"},\"wordCount\":6730,\"publisher\":{\"@id\":\"https:\/\/en.egetestcenter.com\/#organization\"},\"articleSection\":[\"EMC\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/\",\"url\":\"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/\",\"name\":\"2014\/30 \/ EU Electromagnetic Compatibility Regulation • EMC Test Equipments | Chambers | Certifications\",\"isPartOf\":{\"@id\":\"https:\/\/en.egetestcenter.com\/#website\"},\"datePublished\":\"2017-02-07T16:18:17+00:00\",\"dateModified\":\"2018-12-20T13:51:34+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/en.egetestcenter.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"2014\/30 \/ EU Electromagnetic Compatibility Regulation\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/en.egetestcenter.com\/#website\",\"url\":\"https:\/\/en.egetestcenter.com\/\",\"name\":\"EMC Test Equipments | Chambers | Certifications\",\"description\":\"We offer EMC & RF Test Systems and Chambers, Testing and Certification Services\",\"publisher\":{\"@id\":\"https:\/\/en.egetestcenter.com\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/en.egetestcenter.com\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/en.egetestcenter.com\/#organization\",\"name\":\"Testups Turkey\",\"url\":\"https:\/\/en.egetestcenter.com\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/en.egetestcenter.com\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/en.egetestcenter.com\/wp-content\/uploads\/2020\/03\/TESTUPS-logo-TR.png\",\"contentUrl\":\"https:\/\/en.egetestcenter.com\/wp-content\/uploads\/2020\/03\/TESTUPS-logo-TR.png\",\"width\":1849,\"height\":1659,\"caption\":\"Testups Turkey\"},\"image\":{\"@id\":\"https:\/\/en.egetestcenter.com\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/TestupsTurkey\/\",\"https:\/\/twitter.com\/testupsturkey\",\"https:\/\/www.instagram.com\/testupsturkey\/\",\"https:\/\/www.linkedin.com\/company\/testupsturkey\",\"https:\/\/www.youtube.com\/channel\/UChojf5F1Krw6GdxzMparY2Q\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/en.egetestcenter.com\/#\/schema\/person\/95a2fae34598c5492c375b720e92921d\",\"name\":\"ETCadmin41\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/en.egetestcenter.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/b183c948d8cd69737cfa681765df3674?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/b183c948d8cd69737cfa681765df3674?s=96&d=mm&r=g\",\"caption\":\"ETCadmin41\"},\"description\":\"Electrical and Electronics Engineer Check my LinkedIn Page: https:\/\/www.linkedin.com\/in\/kabukcu\/\",\"sameAs\":[\"https:\/\/en.egetestcenter.com\"],\"url\":\"https:\/\/en.egetestcenter.com\/author\/kabukcu\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"2014\/30 \/ EU Electromagnetic Compatibility Regulation • EMC Test Equipments | Chambers | Certifications","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/","og_locale":"en_US","og_type":"article","og_title":"2014\/30 \/ EU Electromagnetic Compatibility Regulation • EMC Test Equipments | Chambers | Certifications","og_description":"ELECTROMAGNETIC COMPATIBILITY REGULATION (2014\/30 \/ AB) FIRST PART Purpose, Scope, Basis and Definitions Goal ARTICLE 1 –\u00a0(1) The purpose of this Regulation is to regulate the electromagnetic compatibility of the equipment and to ensure the functioning of the market in such a way as to comply with an adequate level of electromagnetic compatibility of the […]","og_url":"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/","og_site_name":"EMC Test Equipments | Chambers | Certifications","article_publisher":"https:\/\/www.facebook.com\/TestupsTurkey\/","article_published_time":"2017-02-07T16:18:17+00:00","article_modified_time":"2018-12-20T13:51:34+00:00","og_image":[{"width":864,"height":486,"url":"https:\/\/en.egetestcenter.com\/wp-content\/uploads\/2017\/02\/yonetmelik.jpg","type":"image\/jpeg"}],"author":"ETCadmin41","twitter_card":"summary_large_image","twitter_creator":"@testupsturkey","twitter_site":"@testupsturkey","twitter_misc":{"Written by":"ETCadmin41","Est. reading time":"34 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/#article","isPartOf":{"@id":"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/"},"author":{"name":"ETCadmin41","@id":"https:\/\/en.egetestcenter.com\/#\/schema\/person\/95a2fae34598c5492c375b720e92921d"},"headline":"2014\/30 \/ EU Electromagnetic Compatibility Regulation","datePublished":"2017-02-07T16:18:17+00:00","dateModified":"2018-12-20T13:51:34+00:00","mainEntityOfPage":{"@id":"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/"},"wordCount":6730,"publisher":{"@id":"https:\/\/en.egetestcenter.com\/#organization"},"articleSection":["EMC"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/","url":"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/","name":"2014\/30 \/ EU Electromagnetic Compatibility Regulation • EMC Test Equipments | Chambers | Certifications","isPartOf":{"@id":"https:\/\/en.egetestcenter.com\/#website"},"datePublished":"2017-02-07T16:18:17+00:00","dateModified":"2018-12-20T13:51:34+00:00","breadcrumb":{"@id":"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/en.egetestcenter.com\/2014-30-eu-electromagnetic-compatibility-regulation\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/en.egetestcenter.com\/"},{"@type":"ListItem","position":2,"name":"2014\/30 \/ EU Electromagnetic Compatibility Regulation"}]},{"@type":"WebSite","@id":"https:\/\/en.egetestcenter.com\/#website","url":"https:\/\/en.egetestcenter.com\/","name":"EMC Test Equipments | Chambers | Certifications","description":"We offer EMC & RF Test Systems and Chambers, Testing and Certification Services","publisher":{"@id":"https:\/\/en.egetestcenter.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/en.egetestcenter.com\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/en.egetestcenter.com\/#organization","name":"Testups Turkey","url":"https:\/\/en.egetestcenter.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/en.egetestcenter.com\/#\/schema\/logo\/image\/","url":"https:\/\/en.egetestcenter.com\/wp-content\/uploads\/2020\/03\/TESTUPS-logo-TR.png","contentUrl":"https:\/\/en.egetestcenter.com\/wp-content\/uploads\/2020\/03\/TESTUPS-logo-TR.png","width":1849,"height":1659,"caption":"Testups Turkey"},"image":{"@id":"https:\/\/en.egetestcenter.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/TestupsTurkey\/","https:\/\/twitter.com\/testupsturkey","https:\/\/www.instagram.com\/testupsturkey\/","https:\/\/www.linkedin.com\/company\/testupsturkey","https:\/\/www.youtube.com\/channel\/UChojf5F1Krw6GdxzMparY2Q"]},{"@type":"Person","@id":"https:\/\/en.egetestcenter.com\/#\/schema\/person\/95a2fae34598c5492c375b720e92921d","name":"ETCadmin41","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/en.egetestcenter.com\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/b183c948d8cd69737cfa681765df3674?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/b183c948d8cd69737cfa681765df3674?s=96&d=mm&r=g","caption":"ETCadmin41"},"description":"Electrical and Electronics Engineer Check my LinkedIn Page: https:\/\/www.linkedin.com\/in\/kabukcu\/","sameAs":["https:\/\/en.egetestcenter.com"],"url":"https:\/\/en.egetestcenter.com\/author\/kabukcu\/"}]}},"_links":{"self":[{"href":"https:\/\/en.egetestcenter.com\/wp-json\/wp\/v2\/posts\/229"}],"collection":[{"href":"https:\/\/en.egetestcenter.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/en.egetestcenter.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/en.egetestcenter.com\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/en.egetestcenter.com\/wp-json\/wp\/v2\/comments?post=229"}],"version-history":[{"count":3,"href":"https:\/\/en.egetestcenter.com\/wp-json\/wp\/v2\/posts\/229\/revisions"}],"predecessor-version":[{"id":1220,"href":"https:\/\/en.egetestcenter.com\/wp-json\/wp\/v2\/posts\/229\/revisions\/1220"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/en.egetestcenter.com\/wp-json\/wp\/v2\/media\/245"}],"wp:attachment":[{"href":"https:\/\/en.egetestcenter.com\/wp-json\/wp\/v2\/media?parent=229"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/en.egetestcenter.com\/wp-json\/wp\/v2\/categories?post=229"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/en.egetestcenter.com\/wp-json\/wp\/v2\/tags?post=229"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}